TSC 5 壓鑄螺母 SELF-CLINCHING LOCK NUTS

TSC 5  壓鑄螺母

SELF-CLINCHING LOCK NUTS

TSC 5 - DIMENSIONS & SPECIFICATIONS													(MM)
THREAD SIZE	L LENGTH ±0.20									H ±0.20	D +0.00 -0.08	+0.08 -0.00	MIN
M3.5X0.6	4	6	8	10	12	14	16	18	20	7.20	6.19	6.18	1.00
M4X0.7		6	8	10	12	14	16	18	20	8.20	7.20	7.18	1.00
M5X0.8			8	10	12	14	16	18	20	8.20	7.20	7.18	1.00
S	2	3	4	6	8	8	8	8	8

擠壓扣件之優點：

• 擠壓扣件可在任何平行的施力下進行安裝。

• 擠壓扣件具備高拉力&高扭力。

• 安裝擠壓扣件不需要倒角或去毛邊之類的特殊鑽孔。

• 安裝擠壓扣件後金屬板的另一面能夠保持平整。

• 安裝後擠壓扣件無重複攻牙之必要。

• 安裝擠壓扣件成本低。

ADVANTAGES OF CLINCHING PARTS:

·         May be installed using any parallel acting squeezing force.

·         Provide high pushout and torque-out resistance.

·         Do not require special hole preparation, such as chamfering and deburring.

·         Reverse side of metal sheet remains flush.

·         No retapping necessary after application.

·         Low installed costs.

壓鑄螺母：

• 有螺紋的螺帽強度較低碳鋼 (軟鋼) 螺絲高，常被用於組裝時，需要高強度螺牙的裝配物件上。

• 適用在表層及內板須分隔開的組裝物件，如電子產品。

• 透牙及盲孔為一般常用之規格。

 ★ NUTS：

Nuts with thread strengths greater than mild steel screws are commonly used wherever strong internal.

Threads are needed for component attachment of fabrication assembly.

★ 其他尺寸和材質可以客戶需求訂製。

★ Other sizes, material are available upon request.