顯示具有 TIRE GAUGE KIT 標籤的文章。 顯示所有文章
顯示具有 TIRE GAUGE KIT 標籤的文章。 顯示所有文章

2014年6月19日 星期四

TIRE GAUGE KIT


TIRE GAUGE KIT


TS-SET-01
  • Pencil type tire gauge:5~50PSI,Angle Head
  • Tire tread depth gauge:1~25mm
  • Metal case with foam tray inside.

TS-SET-02
  • Dial type tire gauge:10~100PSI,Long Reach Angle Chuck
  • Tire tread depth gauge:1~25mm
  • Valve tool 4 way
  • Aluminum valve caps (choice of color: black, silver, blue)
  • Metal case with foam tray inside.


  FEATURES:
  • Classic design
  • Accurate measurement
  • Client's LOGO acceptable
  • Suitable for most cars, trucks, motorcycles and bike...etc.
  • The normal vehicle maintenance, tire pressure should be measured once a month.


USAGE:

     1. Screw off the knot of tyre valve

     2. Fix the copper head of the gauge to the valve

     3. Then the device will show the pressure

     4. Add gas when pressure is slow or vice versa.

     5. After the measurement, screw off the copper head and press the air bleeder to make the indicator to 0. screw up the valve of the tyre.




From the relational drawing between tire and grounding area, we can understand the wearing condition from the surface of tire. 
  • Under Inflation (as above middle drawing): Two side of tire will be worn down. Rims will loss the protection from the tire and increase the chance of hitting the road. In this situation, it will become " deformed, broken", and even have severe tire brust. 
  • Over Inflation (as above right hand side drawing): In this situation, the middle of tire will be worn down very fast. The tire will loss traction when brakes the car due to lack of contact between tire and grounding area and also the decreasing of friction. The braking distance will become longer and it might cause the death by losing control.
It is very important to check the tire regularly and it cannot be overlooked. The correct rire is not only about the comfort during driving, it will also extend the tire life.


Important notice: 
Do not using the tire gauge when engine is running (heating) since the hot aire in the tire is unstable and it create the inaccuracy of measuring value.


★ SCALES (Bar, kPa, kg/cm2) CAN BE CUSTOMIZED.

盒裝胎壓計 TIRE GAUGE KIT


盒裝胎壓計

TIRE GAUGE KIT


TS-SET-01
  • 胎壓計:5~50PSI,Angle Head
  • 胎深計:1~25mm
  • 金屬盒裝

TS-SET-02
  • 錶盤式胎壓計:10~100PSI,Long Reach Angle Chuck
  • 胎深計:1~25mm
  • 4 in 1 工具
  • 氣嘴蓋-鋁 (黑色、銀色、藍色)
  • 金屬盒裝


  盒裝胎壓計之特性:

  • 構造簡單,設計美觀
  • 精準量測,且不需電池
  • 操作容易,插入輪胎氣嘴即可立即測量
  • 可在盒上印製公司LOGO,送禮、自用兩相宜



盒裝胎壓計之應用:

  • 汽機車
  • 大型卡車
  • 腳踏車(登山車、山地車、公路車)…等



胎壓不足或過高都會造成輪胎的磨損,如下圖:


從胎壓與接地面積的關係圖,來了解實際的胎面磨耗情形

  • 胎壓不足(如圖面中間):會造成兩側磨損,且鋁圈外緣也會因少掉胎壓的保護而增加直接撞擊路面的機會,容易造成「鋁圈變形、破裂」,嚴重甚至會爆胎。
  • 胎壓過度(如圖面右邊):則會造成中間磨耗較快,且因為接地面積不足,摩擦力下降,可能在需要煞車時,造成輪胎抓地力不足,不但使得煞車距離變長更有可能造成鎖死失控。

正確的胎壓除了騎乘的舒適性,也可以讓器材壽命更長久,

因此,定期確認胎壓的正常是必要且不可忽視的。



重要提示:

不要在熱胎的情況下調整胎壓,因為熱胎時胎內熱空氣不穩定,測量誤差比較大。


★ 刻度單位可依客戶要求訂製