快速擊釘 SPEED PIN RIVET / DRIVE PIN RIVET

快速擊釘

SPEED PIN RIVET / DRIVE PIN RIVET

材質: 

身體: 鋁 2117 / 白鐵 302 (INOX A2) / 鐵 1006

芯: 鋁 2024 / 白鐵 304 (INOX A2) / 鐵 1022

MATERIAL AVAILABLE:

BODY: Aluminum 2117 / Stainless Steel 302 (INOX A2/18-8) / Steel 1006

PIN: Aluminum 2024 / Stainless steel 304 (INOX A2/18-8) / Steel 1022

表面處理:

鍍三價白/黃/黑鋅、陽極處理、洗清。

FINISH SURFACE AVAILABLE:

PLATING: CR3 white zinc plated/ CR3 yellow zinc plated/ CR3 black zinc plated/ anodized/ clean

 * 快速擊釘安裝容易且快速。
 * 一把鐵鎚即可安裝快速擊釘，不需特殊工具。
 * 快速擊釘可以各種材料製成。 
 * 快速擊釘頭型多樣化。
 * 快速擊釘拆卸簡單且不會對物件表面造成傷害。
 * 快速擊釘抗鏽。
 * 快速擊釘適用於各種厚度。
 * 安裝快速擊釘後外型美觀。
 
 * Speed pin rivet is fast and easy to install.
 * No special installation tool is required for speed pin rivet, just a hammer will do.
 * Various materials are available for speed pin rivet.
 * Various head styles are available for speed pin rivet.
 * Speed pin rivet is easy to uninstall, and it will not damage the application surface.
 * Speed pin rivet can be rust resistant.
 * Speed pin rivet can be applied to wide thickness.
 * The appearance looks good after installation.

★ 其他尺寸和材質可依客戶要求訂製。

2014台北國際建築建材暨產品展

晟睿實業有限公司要參展囉~!!

2014台北國際建築建材暨產品展

2014 Taipei Building Show

12/11~14 (四~日) 10:00 ~ 18:00

我們家在 B231

歡迎大家來我們攤位坐坐喔~~

防盜公母套系列 - 單向、梅花PIN、凸頭十字溝、特殊-翼型、建築用

防盜公母套系列

SECURITY SYSTEMS

單向公母套

ONE WAY SEX BOLTS

單向公母套之材質：

鐵、白鐵、銅。

MATERIAL AVALIABLE: 

STEEL, STAINLESS STEEL, ALUMINUM, BRASS

★ 其他尺寸及材質可依客戶要求訂製。

★ OTHER SIZE, MATERIAL ARE AVAILABLE UPON REQUEST

梅花帶PIN公母套

SIX LOBE WITH PIN SEX BOLT

梅花帶PIN公母套之材質：

鐵、白鐵、銅、鋁。

MATERIAL AVALIABLE: 

STEEL, STAINLESS STEEL, ALUMINUM, BRASS

梅花帶PIN公母套之特性：

採特殊頭型設計，具防盜功能，一般板手 (如：十字板手、六角板手、梅花板手) 皆無法拆卸。

ADOPT SPECIAL HEAD TYPE AND PUNCH ON THE DESIGN IN SCREW, HAVE SAFE, GUARD TAKE APART AND THEFT, OFFER FUNCTION PROTECTED TO DESTROY TO DEFENDING. GENERAL WRENCH SET IS ALL UNABLE TO DESMANTLE SUCH AS CROSS, STRAIGHT-LINE HEX KEY, TORX KEY ETC.

★ 其他尺寸及材質可依客戶要求訂製。

★ OTHER SIZE, MATERIAL ARE AVAILABLE UPON REQUEST

翼型螺帽

E SELF-DRIVING NUT

翼型螺帽之材質：
鐵、白鐵、銅。

MATERIAL AVALIABLE: 

STEEL, STAINLESS STEEL AND BRASS

翼型螺帽有以下優點：

• 於安裝時將螺帽置於物件前方，螺絲置於物件後方

• 以簡易的工具即可於任何地點安裝翼型螺帽

• 安裝翼型螺帽時不會對物件造成損傷

• 翼型螺帽可安裝於多種材質之物件

• 翼型螺帽上的牙會於安裝時崁入物件

• 翼型螺帽安裝容易、快速、省力且安全

• 可於翼型螺帽的前端刻印公司LOGO

ADVANTAGES:

• INSTALL SLEEVE NUT TO ACCESS FRONT SIDE OF THE WORK PIECE & SCREW IN FROM BACK SIDE.

• INSTALL WITHOUT ANY COMPLICATED TOOL AT ANY LOCATION ON THE ASSEMBLY.

• INSTALL WITHOUT PRODUCING ANY HARMFUL MARK.

• INSTALL INTO VARIES MATERIAL.

• THE FANGS ON THE BODY CUT INTO THE APPLICATION DURING ASSEMBLY.

• EASY, FAST & SAFE INSTALLATION.

操作說明：

安裝翼型螺帽時，螺帽上的牙會崁入物件，並且產生咬合的力道，當螺絲從反方向轉入時，牙會緊緊咬住物件。

INSTRUCTIONS OF E-SELF DRIVING NUT:

AS THE SLEEVE NUT IS STALLED, THE FANGS ON THE BODY ACTUALLY CUT INTO THE APPLICATION & PROVIDES GRIP STRENGTH. WHEN SCREW ON THE OPPOSITE SIDE HAVE DRIVEN, THE FANGS WILL GRIP APPLICATION TIGHTLY.

特色：（相較於公母套）

1.  設計：螺帽在螺身上有牙

• 可緊緊的咬住物件
• 不容易被拆解
• 防止有人意圖拔出

2.   螺絲的頭型可供選擇

• 螺絲頭可以是防盜的樣式
• 難以拆解
• 結合完美的外觀

FEATURE OF E-SELF DRIVING NUT

(COMPARE WITH SEX BOLTS)

1.    ROUND BODY WITH FANGSON IT

• GRIP THE APPLICATION TIGHTLY
• CANNOT BE DISASSEMBLED EASILY
• PREVENT ANY ONE WHO INTENT TO PULL OUT

2.    SCREW HEADCAN BE YOUR CHOICE

• THE SCREW HEAD CAN BE TAMPERPROOF
• HARDLY TO DISASSEMBLED
• COMBINE WITH GOOD SURFACE OUTLOOK 

★ 其他尺寸及材質可依客戶要求訂製。

★ OTHER SIZE, MATERIAL ARE AVAILABLE UPON REQUEST

凸頭十字公母套

TRUSS COMBO HEAD POST SCREW

凸頭十字公母套之材質：

鐵、白鐵、銅、鋁。

MATERIAL AVALIABLE: 

STEEL, STAINLESS STEEL, ALUMINUM, BRASS

★ 其他尺寸及材質可依客戶要求訂製。

★ OTHER SIZE, MATERIAL ARE AVAILABLE UPON REQUEST

建築用公母套

ARCHITECTURAL SEX BOLTS

建築用公母套之材質：

鐵、白鐵、鋁、銅。

MATERIAL：

STEEL, STAINLESS STEEL, ALUMINUM, BRASS

建築用公母套之特色 & 優點：

• 母套頭型採半圓頭設計，搭配的螺絲採十字平頭設計

• 於安裝時將母套置於外露地方，螺絲置於後方，因母套頭型無工具可拆除，具防盜功能

• 可安裝於多種材質之物件

• 安裝容易、快速、省力且安全

• 可應用的範圍廣，多使用於門窗五金、建築五金

FETURES & ADVANTANGES：

• No way to turn the sex bolt, because Architectural Sex Bolts have smooth Truss Heads - no drive.

• The knurled barrel keeps the sex bolt from spinning while the flat head screw is tightened from the other side.

• Strong, secure, easy to assemble.

• Good looking solution for many sheet metal anchoring applications.

• Particular useful in fiberglass marine applications.

APPLICATIONS：

• Door and Lock Accessory mounts

• Hurricane Protection Shutters

• Elevator Protection Gates

• HVAC ventilation

• Docks and Construction projects

• Architectural - Railings, Cabinetry, Shutters, Seats, and more.

★ 其他尺寸及材質可依客戶要求訂製。

★ OTHER SIZE, MATERIAL ARE AVAILABLE UPON REQUEST

TSC 8 壓鑄螺母 BLIND PRESSED NUTS

TSC 8  壓鑄螺母

BLIND PRESSED NUTS

TSC 8 - DIMENSIONS & SPECIFICATIONS									(MM)
THREAD SIZE	P/N.	BARREL DIA. B MAX.	MIN	+0.08 -0.00	SHANK DIA. C MAX.	L MAX.	A MAX.	E ±0.25	MIN
M3X0.5	3501	3.80	1.00	4.25	4.22	8.50	0.97	6.35	4.80
	3502		1.40				1.37
M4X0.7	4701	5.20	1.00	5.40	5.38	9.80	0.97	7.95	6.90
	4702		1.40				1.37
M5X0.8	5801	6.00	1.00	6.40	6.38	9.80	0.97	8.75	7.10
	5802		1.40				1.37
M6X1.0	6101	7.80	1.40	8.75	8.72	12.70	1.37	11.10	8.60
	6102		2.30				2.21

TSC 8 - DIMENSIONS & SPECIFICATIONS									(INCH)
THREAD SIZE	P/N.	BARREL DIA. B MAX.	MIN	+0.003 -0.000	SHANK DIA. C MAX.	L MAX.	A MAX.	E ±0.01	MIN
#4-40	4401	0.149	0.040	0.166	0.165	0.335	0.038	0.250	0.190
	4402		0.056				0.054
#6-32	6321	0.169	0.040	0.187	0.186	0.335	0.038	0.280	0.220
	6322		0.056				0.054
#8-32	8321	0.204	0.040	0.213	0.212	0.385	0.038	0.310	0.270
	8322		0.056				0.054
#10-32	10321	0.235	0.040	0.250	0.249	0.385	0.038	0.340	0.280
	10322		0.056				0.054
1/4-20	4201	0.305	0.056	0.344	0.343	0.500	0.054	0.430	0.340
	4202		0.090				0.087

盲孔的壓鑄螺母是用來增長薄金屬板的螺紋長度，他能夠隔絕微塵、油垢、濕氣和空氣的鏽蝕，比起需要精密焊接和特殊組裝程序的螺帽和螺絲型的五金，使用壓鑄螺母顯得更加簡便。

擠壓扣件之優點：

• 擠壓扣件可在任何平行的施力下進行安裝。

• 擠壓扣件具備高拉力&高扭力。

• 安裝擠壓扣件不需要倒角或去毛邊之類的特殊鑽孔。

• 安裝擠壓扣件後金屬板的另一面能夠保持平整。

• 安裝後擠壓扣件無重複攻牙之必要。

• 安裝擠壓扣件成本低。

ADVANTAGES OF CLINCHING PARTS:

·         May be installed using any parallel acting squeezing force.

·         Provide high pushout and torque-out resistance.

·         Do not require special hole preparation, such as chamfering and deburring.

·         Reverse side of metal sheet remains flush.

·         No retapping necessary after application.

·         Low installed costs.

壓鑄螺母：

• 有螺紋的螺帽強度較低碳鋼 (軟鋼) 螺絲高，常被用於組裝時，需要高強度螺牙的裝配物件上。

• 適用在表層及內板須分隔開的組裝物件，如電子產品。

• 透牙及盲孔為一般常用之規格。

 ★ NUTS：

Nuts with thread strengths greater than mild steel screws are commonly used wherever strong internal threads are needed for component attachment of fabrication assembly.

★ 其他尺寸和材質可以客戶需求訂製。

★ Other sizes, material are available upon request.

TSC 7 壓鑄螺母 SELF-CLINCHING STANDOFFS

TSC 7  壓鑄螺母

SELF-CLINCHING STANDOFFS

TSC 7 - DIMENSIONS & SPECIFICATIONS																(MM)
THREAD SIZE	P/N.	L LENGTH ±0.08											+0.08 -0.00	D DIM +0.00 -0.13	MIN	MIN
		TYPES				TYPE ST		TYPE SC
M2.5X0.45	2545	2	3	4	6	8	10	12	14	16	18	19	4.20	4.19	5.80	0.63
	2545B												5.40	5.38	7.10	0.63
M3.0X0.5	350	2	3	4	6	8	10	12	14	16	18	19	4.20	4.19	5.80	0.63
	350B												5.40	5.38	7.10	0.63
M3.5X0.6	356		2	3	4	6	8	10	12	14	16	18	5.40	5.38	7.10	0.63

TSC 7 - DIMENSIONS & SPECIFICATIONS																(INCH)
THREAD SIZE	P/N.	L LENGTH ±0.003												+0.003 -0.000	D DIM +0.000 -0.005	MIN	MIN
		TYPES				TYPE ST		TYPE SC
#2-56	256	0.090	0.125	0.187	0.250	0.312	0.375	0.437	0.500	0.562	0.625	0.687	0.750	0.166	0.165	0.230	0.025
	256B													0.213	0.212	0.270	0.025
#4-40	440	0.090	0.125	0.187	0.250	0.312	0.375	0.437	0.500	0.562	0.625	0.687	0.750	0.166	0.165	0.230	0.025
	440B													0.213	0.212	0.270	0.025
#6-32	632		0.090	0.125	0.187	0.250	0.312	0.375	0.437	0.500	0.562	0.625	0.687	0.213	0.212	0.270	0.025

建議安裝程序：

1. 於鐵板上沖壓或鑽出適當尺寸之孔徑，不要進行二次加工處理，如：去毛邊。

2. 將壓鑄螺母穿過板材上的孔，固定於鐵鉆上。

3. 使鉚合機和鐵砧表面平行，而後施加足夠的擠壓力量將壓鑄螺母的頭崁入板材。

擠壓扣件之優點：

• 擠壓扣件可在任何平行的施力下進行安裝。

• 擠壓扣件具備高拉力&高扭力。

• 安裝擠壓扣件不需要倒角或去毛邊之類的特殊鑽孔。

• 安裝擠壓扣件後金屬板的另一面能夠保持平整。

• 安裝後擠壓扣件無重複攻牙之必要。

• 安裝擠壓扣件成本低。

ADVANTAGES OF CLINCHING PARTS:

• May be installed using any parallel acting squeezing force.

• Provide high pushout and torque-out resistance.

• Do not require special hole preparation, such as chamfering and deburring.

• Reverse side of metal sheet remains flush.

• No retapping necessary after application.

• Low installed costs.

壓鑄螺母：

• 有螺紋的螺帽強度較低碳鋼 (軟鋼) 螺絲高，常被用於組裝時，需要高強度羅牙的裝配物件上。

• 適用在表層及內板須分隔開的組裝物件，如電子產品。

• 透牙及盲孔為一般常用之規格。

★ STANDOFFS：

Used where it is necessary to stack or space components away from the panel.

Thru-threaded or blind types are generally standard.

★ 其他尺寸和材質可以客戶需求訂製。

★ Other sizes, material are available upon request.